The car is a vw polo 2010. It had a original key and was supposed to get a second key.
The tools I got are :
Key tool mini xhorse
Xhorse xe key with super chip xt27
Xtool ip900bt (for programming)
Steps I have done.
- Cut the key
- Programmed with the key tool mini the key to id48 tp23 (same as I have read on the original key)
- started the ip900bt and started “learn key”
- the car started its programm so I put the original key, i waited 5-10 second but I heard no sound or anything. Also on the diagnostic tool it didnt update or anything. So i pulled the key out and put the xhorse key in, after 5 seconds it gave me “no key”. I cant go further with anything. The diagnostic tool also turned of after a while.
I cannot connect the diagnostic tool anymore :” no connection can be made”
Everytime i put the original key in, it says “1–2” on the display. And when i put the second key (the xhorse) it says again “no key”
I tried removing the battery for 15m, but it still is in the same “1–2” .
What to do know..
